奧林巴斯微單相機E-pl3怎么看快門數

1. While holding the "Menu" button， press Power button to switch on

按住Menu鍵的同時按電源鍵

2. Press "Menu" and go to "Monitor brightness
adjustment" screen
按Menu進入菜單，進入屏幕亮度調整

3. Press "Info" and "OK"
button at same time， you will see the screen showing "Olympus"

同時按住Info和OK鍵，這時你應該可以看到屏幕上顯示Olympus...

4. Press the following buttons in
the sequence: Up， Down， Left， Right and then press the Shutter， followed by Up
(dial button in my E-P2)
按順序按下: 上，下，左，右，快門，上，你就能進入工程菜單了

5.
Engineering mode page is seen. Press dial button to Page 1， 2， 3， and
"D".
通過上下左右鍵進入Page1， 2， ，3， D

6. Shutter count is on "Page 2"
under "R".
其中， Page 2的R 顯示的就是快門數。

The other lines on the screen
mean:

R: shutter release count 快門數
S: flash use count 閃光數
C: CMOS
cleaning mode (with mirror lock-up - in E-410 series)
U: number of
ultrasonic dedusting， ~ number of power switch on 自動除塵數(相當于電源開關次數)
V: number
of use of LiveView 使用Liveview的次數
B: number of shot using In-Body
Stablization 使用防抖的次數